机器特点

1. 双冷双热模块，产能大，生产效率高。
2. 热内外模温度可个别调整，可适用各种不同材质之鞋面与内里的加温需求。
3. 经预定型后之鞋后踵套完全与鞋面及内里粘合，不易脱离及内里完全拉平，
   提高鞋面质量，减少不良率。
4. 鞋面机台设计操作简单又方便。
5. 夹具可做行程调整或选择不用，适用各种不同鞋型。
6. 模具依客户鞋型定制，可获最准确定型效果。
7. 特殊反面模可做不良品及再整形，消除皱纹及增加鞋口之美观。
8. 环保之冷冻系统独特设计，效率高，冷冻速度最快，正常运转10分钟内蒸
   发器可达-20℃以上。

Machine Features

1.High output & efficiency can be obtained from two cold & hot mould sets.

2.The hot mould can be adjusted individually to be sultable for upper of different
material and the heating request of lining upper.

3.After pre-moulding ,the counter,upper and lining will be adhered & flatten to
decrease the happen of reject.

4.Purposed slant design of machine is easy and convenient to be operated.

5.The loose & tighe adjusted of upper by clipper can be setted to openly or not for
different kind of shoes.

6.Custom-made last mould offers the highest accuracy.

7.The reject can be re-shaped to get perface top line and non wrinkle happened
by the special inverse moulds.

8.High power cooling system for environment protect puipose it can get the best
effect of moulding.(Vaporizer temperature 20℃ down after running 10 minutes).